KOR

Products

Ozone generator

Primozone series generators are innovative ozone solutions featured with high ozone concentration, high gas pressure and a modular concept offering effective performance.
Even with one module being removed from this modular system, the generator keeps running without any interruption to ozone production, which enables repair procedures without suspending the generator.
In addition, new modules can be added whenever needed.
Primozone can be swiftly extended when the demand for ozone rises.
Former ozone generators required cleaning of discharge vessels on a regular basis because of nitrogen oxide.
Gas and liquid pass through an anodized aluminum reactor and profile with high gas pressure, which prevents contamination of the discharge reactor.
Primozone and PAOR will continue to collaborate for the world-class ozone solution to realize the vision of becoming the best ozone water treatment system provider.

PAOR contract in Korea

So far, we have supplied our ozone systems to approximately 150 sites in Korea including water purification plants, sewage treatment plants, industrial waste water treatment plants and livestock waste water treatment plants

Innovative ozone technology

  • The new generation ozone generator is easy to use and maintain
  • Aluminum ozone reactor and power supply unit (SEPT) all patented
  • The same standard is applied to all products and spare parts (PSU & Reactor) across all generator product lines
  • All modules work in the fault-tolerant state even when a module is out of function. The maximum of 2% of the ozone amount is lost during repair of the power supply unit
  • Operation of the ozone generator does not require stoppage during repair procedures

Features

  1. Highest ozone concentration (20wt%/300g/N㎥)

    • Easy to select ozone concentration in the range of 10~20wt% (150g/N㎥ ~ 300g/N㎥)
    • High ozone concentration reduces the gas-liquid ratio and increases ozone dissolution efficiency and pollution oxidation reaction efficiency
    • Economic efficiency is maximized when ozone concentration is at the optimal level, 18wt% (oxygen and electricity cost). See the below chart

  2. Easy to operate (photo explanation)

    • You only need to set the setpoint and ozone concentration
    • Operation is very, easy and convenient

  3. Highest ozone gas pressure 3.0bar(g)

    • A durable ozone generator enables the use up to the highest ozone gas pressure
    • The pressure test by 10㎏/㎠ has been conducted in the Primozone factory
    • Our products supply twice as high ozone gas pressure as our competitors

  4. Low Capex and Opex

    • The figure shows that you can reduce CAPEX more than 40% with Primozone solution
    • Also, you can reduce operation expenses

  5. Small footprint

    • 980mm x 840mm x 2050mm (GM48)
    • Easy to move by forklift

  6. Various model lineups that suit various customer needs

    Primozone unit Power consumption(kW) Ozone concentration(wt %) Cooling water(㎥/hr) Max capacity at 13.4 wt %
    (equal to 200g/N㎥)
    GM1 0.6 10 ~ 20 wt % 0.1 50 g/h　2.6 lbs/day
    GM2 1.8 10 ~ 20 wt % 0.2 100 g/h　5.3 lbs/day
    GM3 1.8 10 ~ 20 wt % 0.3 150 g/h　7.9 lbs/day
    GM6 3.6 10 ~ 20 wt % 0.7 300 g/h　16 lbs/day
    GM12 7.2 10 ~ 20 wt % 1.3 600 g/h　32 lbs/day
    GM18 10.8 10 ~ 20 wt % 2 900 g/h　48 lbs/day
    GM24 14.4 10 ~ 20 wt % 2.7 1.2 kg/h　63.5 lbs/day
    GM36 21.6 10 ~ 20 wt % 4 1.8 kg/h　95.3 lbs/day
    GM48 28.8 10 ~ 20 wt % 5.3 2.4 kg/h　127 lbs/day
    GM96 57.6 10 ~ 20 wt % 10.7 4.8 kg/h　254 lbs/day
    GM192 115.2 10 ~ 20 wt % 21.4 9.6 kg/h　508 lbs/day
    GM288 172.8 10 ~ 20 wt % 31.7 14.4 kg/h　762 lbs/day
    GM336 201.6 10 ~ 20 wt % 37 16.8 kg/h　889 lbs/day

개인정보처리방침

닫기

이메일무단수집거부

닫기

Sitemap

about PAOR
PAOR SYSTEM
Products
Performance
Support
닫기